Driveways and paths · Lanarkshire

New tarmac driveways in East Kilbride

We survey and price new tarmac driveways across East Kilbride and the G74, G75 postcodes, with every layer and its depth written into the quote.

EAST KILBRIDE GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in East Kilbride?

These East Kilbride guide prices reflect rates in Scotland, about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in East Kilbride, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Do I need permission in East Kilbride?

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Where we work in and around East Kilbride

Survey cover and pricing for East Kilbride. East Kilbride is one of the bigger places we cover in Lanarkshire, so survey slots come round regularly.

Postcodes
G74, G75
Area
Lanarkshire
Nearest towns
Cambuslang (3 miles), Blantyre (4 miles), Clarkston (4 miles), Rutherglen (5 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

We also cover nearby Cambuslang, Blantyre, Clarkston, Rutherglen, Giffnock.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in East Kilbride

Can I get a free survey in East Kilbride?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in East Kilbride?

As a 2026 guide in East Kilbride, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a new tarmac driveway take in East Kilbride?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book East Kilbride surveys alongside other jobs in Lanarkshire, and give you dates once the specification is agreed.

Do I need permission for a new tarmac driveway in East Kilbride?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Other work in East Kilbride

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for East Kilbride.

Free survey for new surfacing

New tarmac driveways in East Kilbride: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price