Driveways and paths · Perth and Kinross

New tarmac driveways in Scone

We survey and price new tarmac driveways across Scone and the PH2 postcodes, with every layer and its depth written into the quote.

SCONE GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Scone?

Guide prices below are for Scone, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Scone, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Do I need permission in Scone?

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Where we work in and around Scone

Survey cover and pricing for Scone. Scone is covered on our Perth and Kinross rounds, 2 miles from Perth.

Postcodes
PH2
Area
Perth and Kinross
Nearest towns
Perth (2 miles), Blairgowrie (12 miles), Auchterarder (14 miles), Crieff (17 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Close to Scone: Perth, Blairgowrie, Auchterarder, Crieff.

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Questions about new tarmac driveways in Scone

How quickly can work start in Scone?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Scone surveys alongside other jobs in Perth and Kinross, and give you dates once the specification is agreed.

Is the survey in Scone free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Scone?

As a 2026 guide in Scone, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Scone?

We cover Scone including PH2, and nearby Perth, Blairgowrie, Auchterarder.

Other work in Scone

Tell us what you have in mind for Scone and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Scone: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price