Driveways and paths · Perth and Kinross

New tarmac driveways in Blairgowrie

Planning a new tarmac driveway in Blairgowrie? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

BLAIRGOWRIE GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Blairgowrie

Guide prices below are for Blairgowrie, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Blairgowrie, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Guide only; the survey confirms a fixed price.

Rules that apply in Blairgowrie

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Any new or widened crossing over the pavement needs approval from the council as roads authority.

Where we work in and around Blairgowrie

The key facts for Blairgowrie. Smaller towns such as Blairgowrie are surveyed alongside nearby jobs in Perth and Kinross.

Postcodes
PH10, PH13, PH11
Area
Perth and Kinross
Nearest towns
Scone (12 miles), Perth (14 miles), Crieff (24 miles), Auchterarder (25 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

We also cover nearby Scone, Perth, Crieff, Auchterarder.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Blairgowrie: common questions

Will someone visit before I get a fixed price in Blairgowrie?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Blairgowrie postcodes do you cover?

We cover Blairgowrie including PH10, PH13, PH11, and nearby Scone, Perth, Crieff.

What approvals apply in Blairgowrie?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

New tarmac driveway cost in Blairgowrie: what should I budget?

As a 2026 guide in Blairgowrie, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Blairgowrie

Questions about new tarmac driveways in Blairgowrie? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Blairgowrie: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price