New tarmac driveways in Ashington

New tarmac driveway prices in Ashington

For Ashington, we apply the North East rate, about 7% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£56–£88 per m²
Example: 30 m² drive	£1,850–£2,900
Example: 50 m² drive	£2,800–£4,400
Example: 80 m² drive	£4,450–£7,050

As a 2026 guide in Ashington, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 50 m² drive is roughly £2,800–£4,400. Guide only; the survey confirms a fixed price.

Where we work in and around Ashington

The key facts for Ashington. Ashington is covered on our Northumberland rounds, 4 miles from Blyth.

Postcodes: NE63, NE62, NE64
Area: Northumberland
Nearest towns: Bedlington (3 miles), Blyth (4 miles), Morpeth (5 miles), Cramlington (6 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Bedlington, Blyth, Morpeth, Cramlington, Whitley Bay.

How it is built

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Rules that apply in Ashington

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Questions about new tarmac driveways in Ashington

Do I need permission for a new tarmac driveway in Ashington?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Ashington postcodes do you cover?

We cover Ashington including NE63, NE62, NE64, and nearby Bedlington, Blyth, Morpeth.

How quickly can work start in Ashington?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ashington surveys alongside other jobs in Northumberland, and give you dates once the specification is agreed.

New tarmac driveway cost in Ashington: what should I budget?

As a 2026 guide in Ashington, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 50 m² drive is roughly £2,800–£4,400. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Ashington

Ready for a price in Ashington? Use the guide price tool or send the form, and we'll arrange a visit.