Driveways and paths · North Yorkshire

New tarmac driveways in Thornaby

If you are weighing up new tarmac driveways in Thornaby, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

THORNABY GUIDE£58–£91 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Thornaby

These Thornaby guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£91 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,900–£4,550
Example: 80 m² drive£4,600–£7,300

As a 2026 guide in Thornaby, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Guide only; the survey confirms a fixed price.

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Thornaby

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Covering Thornaby

What applies in Thornaby. Thornaby is covered on our North Yorkshire rounds, 41 miles from York.

Postcodes
TS17, TS8
Area
North Yorkshire
Nearest towns
Stockton-on-Tees (3 miles), Yarm (3 miles), Billingham (4 miles), Middlesbrough (4 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Stockton-on-Tees, Yarm, Billingham, Middlesbrough, Guisborough.

Thornaby: common questions

Is the survey in Thornaby free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Thornaby?

As a 2026 guide in Thornaby, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a new tarmac driveway take in Thornaby?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Thornaby surveys alongside other jobs in North Yorkshire, and give you dates once the specification is agreed.

What approvals apply in Thornaby?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Thornaby

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Thornaby.

Free survey for new surfacing

New tarmac driveways in Thornaby: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price