New tarmac driveways in Northallerton
Homeowners in Northallerton ask us about new tarmac driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

What does a new tarmac driveway cost in Northallerton?
Local guide rates for Northallerton (Yorkshire and the Humber, about 4% below our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £58–£91 per m² |
| Example: 30 m² drive | £1,900–£3,000 |
| Example: 50 m² drive | £2,900–£4,550 |
| Example: 80 m² drive | £4,600–£7,300 |
As a 2026 guide in Northallerton, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Guide only; the survey confirms a fixed price.
Rules that apply in Northallerton
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
What we do on a new tarmac driveway
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Break out and remove the old surface and spoil
- Dig to formation level, usually around 230–250 mm below finished height
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Falls set so water runs to a channel, gully or soft landscaping
Northallerton: the local details
Northallerton at a glance. We cover Northallerton by grouping surveys with nearby North Yorkshire jobs; York is 30 miles away.
- Postcodes
- DL7, DL6
- Area
- North Yorkshire
- Nearest towns
- Yarm (12 miles), Thornaby (14 miles), Ripon (15 miles), Middlesbrough (18 miles)
- Pricing
- Yorkshire and the Humber, about 4% below our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Yarm, Thornaby, Ripon, Middlesbrough, Guisborough.
Northallerton: common questions
Are there planning or highway rules in Northallerton?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How much does a new tarmac driveway cost in Northallerton?
As a 2026 guide in Northallerton, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Edging, drainage and a dropped kerb are priced separately where needed.
Will someone visit before I get a fixed price in Northallerton?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Do you work in my part of Northallerton?
We cover Northallerton including DL7, DL6, and nearby Yarm, Thornaby, Ripon.
Also in Northallerton
- Red tarmac driveways
- Car park and yard repairs
- Tarmac paths and footpaths
- Private and access road surfacing
- Front garden to tarmac driveway
- Car park surfacing
- Everything in Northallerton
Tell us what you have in mind for Northallerton and we'll book a survey and put the specification in writing.
New tarmac driveways in Northallerton: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED