New tarmac driveways in Southport

New tarmac driveway prices in Southport

Local guide rates for Southport (the North West, about 3% below our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Southport, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Guide only; the survey confirms a fixed price.

Do I need permission in Southport?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

How it is built

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Where we work in and around Southport

What applies in Southport. Southport is one of the bigger places we cover in Merseyside, so survey slots come round regularly.

Postcodes: PR8, PR9
Area: Merseyside
Nearest towns: Formby (7 miles), Lytham St Annes (7 miles), Ormskirk (8 miles), Maghull (9 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Formby, Lytham St Annes, Ormskirk, Maghull, Skelmersdale.

Questions about new tarmac driveways in Southport

Is the survey in Southport free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Southport?

As a 2026 guide in Southport, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Southport?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Southport postcodes do you cover?

We cover Southport including PR8, PR9, and nearby Formby, Lytham St Annes, Ormskirk.

More we do in Southport

Ready for a price in Southport? Use the guide price tool or send the form, and we'll arrange a visit.