New tarmac driveways in Colne

What does a new tarmac driveway cost in Colne?

These Colne guide prices reflect rates in the North West, about 3% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Colne, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Guide only; the survey confirms a fixed price.

Do I need permission in Colne?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

How it is built

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Where we work in and around Colne

The key facts for Colne. We cover Colne by grouping surveys with nearby Lancashire jobs; Preston is 23 miles away.

Postcodes: BB8, BB18
Area: Lancashire
Nearest towns: Nelson (2 miles), Burnley (5 miles), Accrington (11 miles), Keighley (11 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Nelson, Burnley, Accrington, Keighley, Rawtenstall.

Your questions answered

Do you work in my part of Colne?

We cover Colne including BB8, BB18, and nearby Nelson, Burnley, Accrington.

How much does a new tarmac driveway cost in Colne?

As a 2026 guide in Colne, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Colne free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Colne?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Colne

Questions about new tarmac driveways in Colne? Call, WhatsApp or use the form, and we'll talk it through.