Tarmac driveway resurfacing in Colne
Planning tarmac resurfacing in Colne? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

What does tarmac resurfacing cost in Colne?
Guide prices below are for Colne, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac resurfacing over a sound existing base | £24–£44 per m² |
| Example: 30 m² drive | £800–£1,450 |
| Example: 50 m² drive | £1,200–£2,200 |
| Example: 80 m² drive | £1,950–£3,500 |
As a 2026 guide in Colne, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,500. Guide only; the survey confirms a fixed price.
Where we work in and around Colne
Survey cover and pricing for Colne. Colne is covered on our Lancashire rounds, 23 miles from Preston.
- Postcodes
- BB8, BB18
- Area
- Lancashire
- Nearest towns
- Nelson (2 miles), Burnley (5 miles), Accrington (11 miles), Keighley (11 miles)
- Pricing
- North West, about 3% below our UK midpoint
- Kerb approvals
- The highway authority
Close to Colne: Nelson, Burnley, Accrington, Keighley, Rawtenstall.
What the price covers
Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.
- Cut out and patch failed areas before overlaying
- Weed treatment and a clean surface
- Bond (tack) coat sprayed to glue the new layer to the old
- New surface course, typically 25–40 mm, laid hot and rolled
- Edges sealed and joints to existing surfaces cut neatly
Planning and kerb rules for Colne
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
Questions about tarmac resurfacing jobs in Colne
Do you work in my part of Colne?
We cover Colne including BB8, BB18, and nearby Nelson, Burnley, Accrington.
How long will the work take at my Colne property?
Often 1–2 days for a typical drive. We book Colne surveys alongside other jobs in Lancashire, and give you dates once the specification is agreed.
How much does tarmac resurfacing cost in Colne?
As a 2026 guide in Colne, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,500. Edging, drainage and a dropped kerb are priced separately where needed.
Can I get a free survey in Colne?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Also in Colne
- Private and access road surfacing
- Car park resurfacing
- Tar and chip driveways
- Front garden to tarmac driveway
- Tarmac paths and footpaths
- Tarmac driveway repairs
- Everything in Colne
Tell us what you have in mind for Colne and we'll book a survey and put the specification in writing.
Tarmac driveway resurfacing in Colne: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED