New tarmac driveways in Tyldesley

New tarmac driveway prices in Tyldesley

For Tyldesley, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Tyldesley, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Guide only; the survey confirms a fixed price.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Dig to formation level, usually around 230–250 mm below finished height
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Covering Tyldesley

Tyldesley at a glance. Tyldesley is 10 miles from Manchester, and we survey there as part of Greater Manchester cover.

Postcodes: M29
Area: Greater Manchester
Nearest towns: Atherton (1 mile), Leigh (2 miles), Walkden (3 miles), Westhoughton (3 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Atherton, Leigh, Walkden, Westhoughton, Farnworth.

Rules that apply in Tyldesley

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Questions about new tarmac driveways in Tyldesley

What approvals apply in Tyldesley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

New tarmac driveway cost in Tyldesley: what should I budget?

As a 2026 guide in Tyldesley, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Tyldesley property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Tyldesley surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Tyldesley?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Tyldesley

Tell us what you have in mind for Tyldesley and we'll book a survey and put the specification in writing.