Driveways and paths · Greater Manchester

New tarmac driveways in Farnworth

A good new tarmac driveway in Farnworth looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

FARNWORTH GUIDE£58–£92 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Farnworth?

Local guide rates for Farnworth (the North West, about 3% below our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£92 per m²
Example: 30 m² drive£1,900–£3,050
Example: 50 m² drive£2,900–£4,600
Example: 80 m² drive£4,650–£7,350

As a 2026 guide in Farnworth, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Guide only; the survey confirms a fixed price.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Farnworth

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Geotextile membrane where the ground is soft or clay
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Covering Farnworth

What applies in Farnworth. Smaller towns such as Farnworth are surveyed alongside nearby jobs in Greater Manchester.

Postcodes
BL4
Area
Greater Manchester
Nearest towns
Walkden (2 miles), Bolton (3 miles), Radcliffe (3 miles), Tyldesley (4 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Walkden, Bolton, Radcliffe, Tyldesley, Swinton.

Questions about new tarmac driveways in Farnworth

How long will the work take at my Farnworth property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Farnworth surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Do you cover all of Farnworth?

We cover Farnworth including BL4, and nearby Walkden, Bolton, Radcliffe.

Are there planning or highway rules in Farnworth?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Farnworth?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Farnworth

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Farnworth.

Free survey for new surfacing

New tarmac driveways in Farnworth: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price