Driveways and paths · Greater Manchester

New tarmac driveways in Middleton

For new tarmac driveways in Middleton, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

MIDDLETON GUIDE£58–£92 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Middleton?

For Middleton, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£92 per m²
Example: 30 m² drive£1,900–£3,050
Example: 50 m² drive£2,900–£4,600
Example: 80 m² drive£4,650–£7,350

As a 2026 guide in Middleton, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Guide only; the survey confirms a fixed price.

Do I need permission in Middleton?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Middleton: the local details

What applies in Middleton. Middleton is 5 miles from Manchester, and we survey there as part of Greater Manchester cover.

Postcodes
M24, M9
Area
Greater Manchester
Nearest towns
Chadderton (2 miles), Heywood (3 miles), Royton (3 miles), Oldham (3 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Close to Middleton: Chadderton, Heywood, Royton, Oldham, Failsworth.

Questions about new tarmac driveways in Middleton

How quickly can work start in Middleton?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Middleton surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Which Middleton postcodes do you cover?

We cover Middleton including M24, M9, and nearby Chadderton, Heywood, Royton.

Will someone visit before I get a fixed price in Middleton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a new tarmac driveway in Middleton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Middleton

Ready for a price in Middleton? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Middleton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price