Driveways and paths · Greater London

New tarmac driveways in Uxbridge

Homeowners in Uxbridge ask us about new tarmac driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

UXBRIDGE GUIDE£72–£114 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Uxbridge?

Guide prices below are for Uxbridge, adjusted for London, where surfacing rates run about 20% above our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£72–£114 per m²
Example: 30 m² drive£2,400–£3,750
Example: 50 m² drive£3,600–£5,700
Example: 80 m² drive£5,750–£9,100

As a 2026 guide in Uxbridge, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 30 m² drive is roughly £2,400–£3,750. Guide only; the survey confirms a fixed price.

Covering Uxbridge

The key facts for Uxbridge. As one of the larger towns in Greater London, Uxbridge sees regular survey visits.

Postcodes
UB8, UB10, SL0, UB9
Area
Greater London
Nearest towns
Ruislip (3 miles), Hayes (3 miles), Gerrards Cross (4 miles), Northolt (5 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Ruislip, Hayes, Gerrards Cross, Northolt, Chalfont St Peter.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Planning and kerb rules for Uxbridge

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in Uxbridge

Do you work in my part of Uxbridge?

We cover Uxbridge including UB8, UB10, SL0, UB9, and nearby Ruislip, Hayes, Gerrards Cross.

Will someone visit before I get a fixed price in Uxbridge?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a new tarmac driveway cost in Uxbridge?

As a 2026 guide in Uxbridge, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 30 m² drive is roughly £2,400–£3,750. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Uxbridge property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Uxbridge surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Also in Uxbridge

Tell us what you have in mind for Uxbridge and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Uxbridge: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price