New tarmac driveways in Stratford

How much should I budget in Stratford?

These Stratford guide prices reflect rates in London, about 20% above our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£72–£114 per m²
Example: 30 m² drive	£2,400–£3,750
Example: 50 m² drive	£3,600–£5,700
Example: 80 m² drive	£5,750–£9,100

As a 2026 guide in Stratford, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 80 m² drive is roughly £5,750–£9,100. Guide only; the survey confirms a fixed price.

Covering Stratford

The key facts for Stratford. Stratford is one of the bigger places we cover in Greater London, so survey slots come round regularly.

Postcodes: E15, E20, E7
Area: Greater London
Nearest towns: Bow (1 mile), Canning Town (2 miles), Leytonstone (2 miles), Ilford (4 miles)
Pricing: London, about 20% above our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Bow, Canning Town, Leytonstone, Ilford, Barking.

Do I need permission in Stratford?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

The build-up we price

Questions about new tarmac driveways in Stratford

Are there planning or highway rules in Stratford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How quickly can work start in Stratford?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Stratford surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Stratford?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a new tarmac driveway cost in Stratford?

As a 2026 guide in Stratford, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 80 m² drive is roughly £5,750–£9,100. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Stratford

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Stratford.