Driveways and paths · Fife

New tarmac driveways in Rosyth

If you are weighing up new tarmac driveways in Rosyth, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

ROSYTH GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Rosyth?

These Rosyth guide prices reflect rates in Scotland, about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Rosyth, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Guide only; the survey confirms a fixed price.

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Rosyth: the local details

What applies in Rosyth. We cover Rosyth by grouping surveys with nearby Fife jobs; Dunfermline is 3 miles away.

Postcodes
KY11
Area
Fife
Nearest towns
Dunfermline (3 miles), Dalgety Bay (3 miles), Cowdenbeath (6 miles), Bo'ness (7 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Close to Rosyth: Dunfermline, Dalgety Bay, Cowdenbeath, Bo'ness, Broxburn.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Do I need permission in Rosyth?

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Questions about new tarmac driveways in Rosyth

What is the price of a new tarmac driveway in Rosyth?

As a 2026 guide in Rosyth, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Rosyth?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Which Rosyth postcodes do you cover?

We cover Rosyth including KY11, and nearby Dunfermline, Dalgety Bay, Cowdenbeath.

How quickly can work start in Rosyth?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Rosyth surveys alongside other jobs in Fife, and give you dates once the specification is agreed.

Also in Rosyth

Ready for a price in Rosyth? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Rosyth: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price