New tarmac driveways in Dalgety Bay

What does a new tarmac driveway cost in Dalgety Bay?

Guide prices below are for Dalgety Bay, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£59–£93 per m²
Example: 30 m² drive	£1,950–£3,050
Example: 50 m² drive	£2,950–£4,650
Example: 80 m² drive	£4,700–£7,450

As a 2026 guide in Dalgety Bay, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Guide only; the survey confirms a fixed price.

The build-up we price

Dalgety Bay: the local details

What applies in Dalgety Bay. Smaller towns such as Dalgety Bay are surveyed alongside nearby jobs in Fife.

Postcodes: EH30
Area: Fife
Nearest towns: Rosyth (3 miles), Dunfermline (5 miles), Cowdenbeath (5 miles), Edinburgh (8 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

We also cover nearby Rosyth, Dunfermline, Cowdenbeath, Edinburgh, Broxburn.

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Dig to formation level, usually around 230–250 mm below finished height
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Rules that apply in Dalgety Bay

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Your questions answered

How long does a new tarmac driveway take in Dalgety Bay?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Dalgety Bay surveys alongside other jobs in Fife, and give you dates once the specification is agreed.

Do I need permission for a new tarmac driveway in Dalgety Bay?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Will someone visit before I get a fixed price in Dalgety Bay?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Dalgety Bay?

As a 2026 guide in Dalgety Bay, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Dalgety Bay

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Dalgety Bay.