New tarmac driveways in Staveley
A good new tarmac driveway in Staveley looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

How much should I budget in Staveley?
For Staveley, we apply the East Midlands rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £59–£93 per m² |
| Example: 30 m² drive | £1,950–£3,050 |
| Example: 50 m² drive | £2,950–£4,650 |
| Example: 80 m² drive | £4,700–£7,450 |
As a 2026 guide in Staveley, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Guide only; the survey confirms a fixed price.
What we do on a new tarmac driveway
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Dig to formation level, usually around 230–250 mm below finished height
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
- Falls set so water runs to a channel, gully or soft landscaping
Staveley: the local details
The key facts for Staveley. Staveley is covered on our Derbyshire rounds, 24 miles from Derby.
- Postcodes
- S43, S21, S44, S20
- Area
- Derbyshire
- Nearest towns
- Chesterfield (3 miles), Dronfield (6 miles), Dinnington (9 miles), Sheffield (9 miles)
- Pricing
- East Midlands, about 2% below our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Chesterfield, Dronfield, Dinnington, Sheffield, Mansfield Woodhouse.
Rules that apply in Staveley
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
The build-up we price
Questions about new tarmac driveways in Staveley
How quickly can work start in Staveley?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Staveley surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.
What approvals apply in Staveley?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Will someone visit before I get a fixed price in Staveley?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Do you work in my part of Staveley?
We cover Staveley including S43, S21, S44, S20, and nearby Chesterfield, Dronfield, Dinnington.
Other work in Staveley
- Tar and chip driveways
- Red tarmac driveways
- Tarmac driveway repairs
- Private and access road surfacing
- Front garden to tarmac driveway
- Tarmac driveway resurfacing
- Everything in Staveley
Questions about new tarmac driveways in Staveley? Call, WhatsApp or use the form, and we'll talk it through.
New tarmac driveways in Staveley: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED