New tarmac driveways in Stanley

How much should I budget in Stanley?

These Stanley guide prices reflect rates in the North East, about 7% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£56–£88 per m²
Example: 30 m² drive	£1,850–£2,900
Example: 50 m² drive	£2,800–£4,400
Example: 80 m² drive	£4,450–£7,050

As a 2026 guide in Stanley, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 30 m² drive is roughly £1,850–£2,900. Guide only; the survey confirms a fixed price.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Do I need permission in Stanley?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Stanley: the local details

Survey cover and pricing for Stanley. Stanley sits 24 miles from Darlington, within our regular County Durham cover.

Postcodes: DH9
Area: County Durham
Nearest towns: Chester-le-Street (5 miles), Consett (5 miles), Whickham (5 miles), Blaydon-on-Tyne (7 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Chester-le-Street, Consett, Whickham, Blaydon-on-Tyne, Gateshead.

Questions about new tarmac driveways in Stanley

How quickly can work start in Stanley?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Stanley surveys alongside other jobs in County Durham, and give you dates once the specification is agreed.

Are there planning or highway rules in Stanley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Stanley?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a new tarmac driveway cost in Stanley?

As a 2026 guide in Stanley, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 30 m² drive is roughly £1,850–£2,900. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Stanley

Ready for a price in Stanley? Use the guide price tool or send the form, and we'll arrange a visit.