New tarmac driveways in Ellesmere Port

New tarmac driveway prices in Ellesmere Port

For Ellesmere Port, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Ellesmere Port, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Guide only; the survey confirms a fixed price.

Layer by layer

Where we work in and around Ellesmere Port

The key facts for Ellesmere Port. Ellesmere Port is 15 miles from Warrington, and we survey there as part of Cheshire cover.

Postcodes: CH65, CH34, CH66
Area: Cheshire
Nearest towns: Garston (4 miles), Speke (5 miles), Chester (6 miles), Neston (6 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Garston, Speke, Chester, Neston, Halewood.

Rules that apply in Ellesmere Port

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Questions about new tarmac driveways in Ellesmere Port

How long will the work take at my Ellesmere Port property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ellesmere Port surveys alongside other jobs in Cheshire, and give you dates once the specification is agreed.

Which Ellesmere Port postcodes do you cover?

We cover Ellesmere Port including CH65, CH34, CH66, and nearby Garston, Speke, Chester.

How much does a new tarmac driveway cost in Ellesmere Port?

As a 2026 guide in Ellesmere Port, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a new tarmac driveway in Ellesmere Port?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Ellesmere Port

Tell us what you have in mind for Ellesmere Port and we'll book a survey and put the specification in writing.