Driveways and paths · Cheshire

Red tarmac driveways in Ellesmere Port

Red tarmac driveways in Ellesmere Port start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

ELLESMERE PORT GUIDE£73–£112 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

How much should I budget in Ellesmere Port?

These Ellesmere Port guide prices reflect rates in the North West, about 3% below our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£73–£112 per m²
Example: 30 m² drive£2,400–£3,700
Example: 50 m² drive£3,650–£5,600
Example: 80 m² drive£5,800–£8,900

As a 2026 guide in Ellesmere Port, red tarmac driveway work runs at about £73–£112 per m² including VAT, so a 30 m² drive is roughly £2,400–£3,700. Guide only; the survey confirms a fixed price.

Ellesmere Port: the local details

What applies in Ellesmere Port. We reach Ellesmere Port on our Cheshire survey days; Warrington is 15 miles away.

Postcodes
CH65, CH34, CH66
Area
Cheshire
Nearest towns
Garston (4 miles), Speke (5 miles), Chester (6 miles), Neston (6 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Close to Ellesmere Port: Garston, Speke, Chester, Neston, Halewood.

What the price covers

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Do I need permission in Ellesmere Port?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Questions about red tarmac driveways in Ellesmere Port

How long does a red tarmac driveway take in Ellesmere Port?

Usually 2–4 working days. We book Ellesmere Port surveys alongside other jobs in Cheshire, and give you dates once the specification is agreed.

Which Ellesmere Port postcodes do you cover?

We cover Ellesmere Port including CH65, CH34, CH66, and nearby Garston, Speke, Chester.

What is the price of a red tarmac driveway in Ellesmere Port?

As a 2026 guide in Ellesmere Port, red tarmac driveway work runs at about £73–£112 per m² including VAT, so a 30 m² drive is roughly £2,400–£3,700. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Ellesmere Port free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Ellesmere Port

Ready for a price in Ellesmere Port? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Red tarmac driveways in Ellesmere Port: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price