Driveways and paths · Cambridgeshire

New tarmac driveways in Huntingdon

New tarmac driveways in Huntingdon start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

HUNTINGDON GUIDE£63–£100 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Huntingdon

Guide prices below are for Huntingdon, adjusted for the East of England, where surfacing rates run about 5% above our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£63–£100 per m²
Example: 30 m² drive£2,100–£3,300
Example: 50 m² drive£3,150–£5,000
Example: 80 m² drive£5,050–£8,000

As a 2026 guide in Huntingdon, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 80 m² drive is roughly £5,050–£8,000. Guide only; the survey confirms a fixed price.

Where we work in and around Huntingdon

The key facts for Huntingdon. Smaller towns such as Huntingdon are surveyed alongside nearby jobs in Cambridgeshire.

Postcodes
PE29, PE28
Area
Cambridgeshire
Nearest towns
St Ives (5 miles), St Neots (9 miles), Cambridge (16 miles), Peterborough (17 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Close to Huntingdon: St Ives, St Neots, Cambridge, Peterborough, March.

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Planning and kerb rules for Huntingdon

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Huntingdon: common questions

Will someone visit before I get a fixed price in Huntingdon?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a new tarmac driveway cost in Huntingdon?

As a 2026 guide in Huntingdon, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 80 m² drive is roughly £5,050–£8,000. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Huntingdon?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Huntingdon property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Huntingdon surveys alongside other jobs in Cambridgeshire, and give you dates once the specification is agreed.

Other work in Huntingdon

Tell us what you have in mind for Huntingdon and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Huntingdon: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price