New tarmac driveways in Sandhurst
For new tarmac driveways in Sandhurst, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

New tarmac driveway prices in Sandhurst
Guide prices below are for Sandhurst, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £66–£105 per m² |
| Example: 30 m² drive | £2,200–£3,450 |
| Example: 50 m² drive | £3,300–£5,250 |
| Example: 80 m² drive | £5,300–£8,350 |
As a 2026 guide in Sandhurst, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Guide only; the survey confirms a fixed price.
Layer by layer
Where we work in and around Sandhurst
Sandhurst at a glance. Sandhurst is covered on our Berkshire rounds, 11 miles from Reading.
- Postcodes
- GU47, GU17
- Area
- Berkshire
- Nearest towns
- Crowthorne (2 miles), Yateley (2 miles), Camberley (2 miles), Farnborough (4 miles)
- Pricing
- South East, about 10% above our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Crowthorne, Yateley, Camberley, Farnborough, Fleet.
Do I need permission in Sandhurst?
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
What the price covers
Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.
- Break out and remove the old surface and spoil
- Geotextile membrane where the ground is soft or clay
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Your questions answered
Can I get a free survey in Sandhurst?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Do you work in my part of Sandhurst?
We cover Sandhurst including GU47, GU17, and nearby Crowthorne, Yateley, Camberley.
Do I need permission for a new tarmac driveway in Sandhurst?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
New tarmac driveway cost in Sandhurst: what should I budget?
As a 2026 guide in Sandhurst, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Edging, drainage and a dropped kerb are priced separately where needed.
Also in Sandhurst
- Tarmac driveway resurfacing
- Permeable tarmac driveways
- Car park and yard repairs
- Private and access road surfacing
- Tar and chip driveways
- Tarmac paths and footpaths
- Everything in Sandhurst
Ready for a price in Sandhurst? Use the guide price tool or send the form, and we'll arrange a visit.
New tarmac driveways in Sandhurst: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED