New tarmac driveways in Crowthorne
A good new tarmac driveway in Crowthorne looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

What does a new tarmac driveway cost in Crowthorne?
Local guide rates for Crowthorne (the South East, about 10% above our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £66–£105 per m² |
| Example: 30 m² drive | £2,200–£3,450 |
| Example: 50 m² drive | £3,300–£5,250 |
| Example: 80 m² drive | £5,300–£8,350 |
As a 2026 guide in Crowthorne, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Guide only; the survey confirms a fixed price.
Covering Crowthorne
Survey cover and pricing for Crowthorne. We cover Crowthorne by grouping surveys with nearby Berkshire jobs; Reading is 10 miles away.
- Postcodes
- RG45
- Area
- Berkshire
- Nearest towns
- Sandhurst (2 miles), Yateley (2 miles), Camberley (3 miles), Wokingham (3 miles)
- Pricing
- South East, about 10% above our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Sandhurst, Yateley, Camberley, Wokingham, Bracknell.
What we do on a new tarmac driveway
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Break out and remove the old surface and spoil
- Geotextile membrane where the ground is soft or clay
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
- Falls set so water runs to a channel, gully or soft landscaping
How it is built
Rules that apply in Crowthorne
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
Your questions answered
Do I need permission for a new tarmac driveway in Crowthorne?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Will someone visit before I get a fixed price in Crowthorne?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How long does a new tarmac driveway take in Crowthorne?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Crowthorne surveys alongside other jobs in Berkshire, and give you dates once the specification is agreed.
New tarmac driveway cost in Crowthorne: what should I budget?
As a 2026 guide in Crowthorne, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Edging, drainage and a dropped kerb are priced separately where needed.
Other work in Crowthorne
- Car park surfacing
- Permeable tarmac driveways
- Tar and chip driveways
- Tarmac driveway repairs
- Car park and yard repairs
- Tarmac paths and footpaths
- Everything in Crowthorne
Ready for a price in Crowthorne? Use the guide price tool or send the form, and we'll arrange a visit.
New tarmac driveways in Crowthorne: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED