Driveways and paths · Berkshire

New tarmac driveways in Ascot

For new tarmac driveways in Ascot, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

ASCOT GUIDE£66–£105 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Ascot?

Local guide rates for Ascot (the South East, about 10% above our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£66–£105 per m²
Example: 30 m² drive£2,200–£3,450
Example: 50 m² drive£3,300–£5,250
Example: 80 m² drive£5,300–£8,350

As a 2026 guide in Ascot, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Ascot

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Where we work in and around Ascot

Survey cover and pricing for Ascot. Ascot is covered on our Berkshire rounds, 13 miles from Reading.

Postcodes
SL5, GU20
Area
Berkshire
Nearest towns
Bracknell (3 miles), Egham (5 miles), Crowthorne (6 miles), Camberley (6 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Close to Ascot: Bracknell, Egham, Crowthorne, Camberley, Windsor.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Ascot: common questions

How quickly can work start in Ascot?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ascot surveys alongside other jobs in Berkshire, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Ascot?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Ascot?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you cover all of Ascot?

We cover Ascot including SL5, GU20, and nearby Bracknell, Egham, Crowthorne.

Other work in Ascot

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Ascot.

Free survey for new surfacing

New tarmac driveways in Ascot: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price