New tarmac driveways in Leighton Buzzard
Homeowners in Leighton Buzzard ask us about new tarmac driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

What does a new tarmac driveway cost in Leighton Buzzard?
Local guide rates for Leighton Buzzard (the East of England, about 5% above our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £63–£100 per m² |
| Example: 30 m² drive | £2,100–£3,300 |
| Example: 50 m² drive | £3,150–£5,000 |
| Example: 80 m² drive | £5,050–£8,000 |
As a 2026 guide in Leighton Buzzard, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Guide only; the survey confirms a fixed price.
Where we work in and around Leighton Buzzard
What applies in Leighton Buzzard. We reach Leighton Buzzard on our Bedfordshire survey days; Luton is 11 miles away.
- Postcodes
- LU7
- Area
- Bedfordshire
- Nearest towns
- Dunstable (6 miles), Bletchley (6 miles), Milton Keynes (10 miles), Aylesbury (10 miles)
- Pricing
- East of England, about 5% above our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Dunstable, Bletchley, Milton Keynes, Aylesbury, Ampthill.
The build-up we price
What the price covers
Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.
- Geotextile membrane where the ground is soft or clay
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Rules that apply in Leighton Buzzard
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
Leighton Buzzard: common questions
How long will the work take at my Leighton Buzzard property?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Leighton Buzzard surveys alongside other jobs in Bedfordshire, and give you dates once the specification is agreed.
Do I need permission for a new tarmac driveway in Leighton Buzzard?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Will someone visit before I get a fixed price in Leighton Buzzard?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What is the price of a new tarmac driveway in Leighton Buzzard?
As a 2026 guide in Leighton Buzzard, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Edging, drainage and a dropped kerb are priced separately where needed.
Also in Leighton Buzzard
- Car park surfacing
- Tarmac driveway resurfacing
- Private and access road surfacing
- Car park and yard repairs
- Red tarmac driveways
- Tar and chip driveways
- Everything in Leighton Buzzard
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Leighton Buzzard.
New tarmac driveways in Leighton Buzzard: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED