New tarmac driveways in Ampthill
New tarmac driveways in Ampthill start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

What does a new tarmac driveway cost in Ampthill?
Local guide rates for Ampthill (the East of England, about 5% above our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £63–£100 per m² |
| Example: 30 m² drive | £2,100–£3,300 |
| Example: 50 m² drive | £3,150–£5,000 |
| Example: 80 m² drive | £5,050–£8,000 |
As a 2026 guide in Ampthill, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 80 m² drive is roughly £5,050–£8,000. Guide only; the survey confirms a fixed price.
Do I need permission in Ampthill?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
The build-up we price
Covering Ampthill
Ampthill at a glance. We cover Ampthill by grouping surveys with nearby Bedfordshire jobs; Luton is 11 miles away.
- Postcodes
- MK45
- Area
- Bedfordshire
- Nearest towns
- Kempston (6 miles), Bedford (8 miles), Dunstable (10 miles), Leighton Buzzard (10 miles)
- Pricing
- East of England, about 5% above our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Kempston, Bedford, Dunstable, Leighton Buzzard, Bletchley.
What the price covers
Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.
- Dig to formation level, usually around 230–250 mm below finished height
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
- Falls set so water runs to a channel, gully or soft landscaping
Your questions answered
What is the price of a new tarmac driveway in Ampthill?
As a 2026 guide in Ampthill, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 80 m² drive is roughly £5,050–£8,000. Edging, drainage and a dropped kerb are priced separately where needed.
Will someone visit before I get a fixed price in Ampthill?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How quickly can work start in Ampthill?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ampthill surveys alongside other jobs in Bedfordshire, and give you dates once the specification is agreed.
Do you cover all of Ampthill?
We cover Ampthill including MK45, and nearby Kempston, Bedford, Dunstable.
Other work in Ampthill
- Car park surfacing
- Red tarmac driveways
- Tarmac driveway repairs
- Tar and chip driveways
- Car park resurfacing
- Car park and yard repairs
- Everything in Ampthill
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Ampthill.
New tarmac driveways in Ampthill: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED