Driveways and paths · Ayrshire

New tarmac driveways in Saltcoats

Planning a new tarmac driveway in Saltcoats? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

SALTCOATS GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Saltcoats?

Local guide rates for Saltcoats (Scotland, about 2% below our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Saltcoats, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Guide only; the survey confirms a fixed price.

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Saltcoats

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Covering Saltcoats

The key facts for Saltcoats. We cover Saltcoats by grouping surveys with nearby Ayrshire jobs; Kilmarnock is 11 miles away.

Postcodes
KA21
Area
Ayrshire
Nearest towns
Ardrossan (1 mile), Stevenston (1 mile), Kilwinning (3 miles), Irvine (5 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

We also cover nearby Ardrossan, Stevenston, Kilwinning, Irvine, Troon.

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Your questions answered

What approvals apply in Saltcoats?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Do you work in my part of Saltcoats?

We cover Saltcoats including KA21, and nearby Ardrossan, Stevenston, Kilwinning.

Will someone visit before I get a fixed price in Saltcoats?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a new tarmac driveway cost in Saltcoats?

As a 2026 guide in Saltcoats, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Saltcoats

Questions about new tarmac driveways in Saltcoats? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Saltcoats: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price