Driveways and paths · Ayrshire

New tarmac driveways in Troon

Every new tarmac driveway we price in Troon comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

TROON GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Troon?

For Troon, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Troon, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Guide only; the survey confirms a fixed price.

Where we work in and around Troon

What applies in Troon. Smaller towns such as Troon are surveyed alongside nearby jobs in Ayrshire.

Postcodes
KA10
Area
Ayrshire
Nearest towns
Prestwick (5 miles), Irvine (5 miles), Ayr (6 miles), Stevenston (8 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Prestwick, Irvine, Ayr, Stevenston, Kilwinning.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Planning and kerb rules for Troon

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Your questions answered

What approvals apply in Troon?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Is the survey in Troon free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Troon?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Troon surveys alongside other jobs in Ayrshire, and give you dates once the specification is agreed.

How much does a new tarmac driveway cost in Troon?

As a 2026 guide in Troon, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Troon

Questions about new tarmac driveways in Troon? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Troon: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price