Tarmac paths and footpaths in Shipley
For tarmac paths in Shipley, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

How much should I budget in Shipley?
For Shipley, we apply the Yorkshire and the Humber rate, about 4% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac garden path or footpath, hand-laid | £53–£86 per m² |
| Example: 10 m² path | £630–£1,050 |
| Example: 20 m² path | £1,150–£1,900 |
| Example: 40 m² path | £2,100–£3,450 |
As a 2026 guide in Shipley, tarmac path work runs at about £53–£86 per m² including VAT, so a 40 m² path is roughly £2,100–£3,450. Guide only; the survey confirms a fixed price.
The build-up we price
What we do on a tarmac path
A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.
- Path set out to the line and width you want
- Excavation to about 150–180 mm with spoil removed
- Timber, kerb or block edging on both sides
- Binder and surface course laid hot by hand and rolled
- Gentle cross-fall so water runs off to the border
Rules that apply in Shipley
Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.
Covering Shipley
What applies in Shipley. Smaller towns such as Shipley are surveyed alongside nearby jobs in West Yorkshire.
- Postcodes
- BD18, BD10, BD9
- Area
- West Yorkshire
- Nearest towns
- Baildon (1 mile), Bradford (3 miles), Bingley (3 miles), Guiseley (4 miles)
- Pricing
- Yorkshire and the Humber, about 4% below our UK midpoint
- Kerb approvals
- The highway authority
Close to Shipley: Baildon, Bradford, Bingley, Guiseley, Yeadon.
Questions about tarmac paths in Shipley
Do I need permission for a tarmac path in Shipley?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
What is the price of a tarmac path in Shipley?
As a 2026 guide in Shipley, tarmac path work runs at about £53–£86 per m² including VAT, so a 40 m² path is roughly £2,100–£3,450. Edging, drainage and a dropped kerb are priced separately where needed.
Will someone visit before I get a fixed price in Shipley?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Which Shipley postcodes do you cover?
We cover Shipley including BD18, BD10, BD9, and nearby Baildon, Bradford, Bingley.
Other work in Shipley
- Car park and yard repairs
- Front garden to tarmac driveway
- Red tarmac driveways
- Tarmac driveway repairs
- Private and access road surfacing
- Permeable tarmac driveways
- Everything in Shipley
Ready for a price in Shipley? Use the guide price tool or send the form, and we'll arrange a visit.
Tarmac paths and footpaths in Shipley: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED