Driveways and paths · West Yorkshire

Tarmac paths and footpaths in Castleford

For tarmac paths in Castleford, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

CASTLEFORD GUIDE£53–£86 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

How much should I budget in Castleford?

Guide prices below are for Castleford, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£86 per m²
Example: 10 m² path£630–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,100–£3,450

As a 2026 guide in Castleford, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Guide only; the survey confirms a fixed price.

Castleford: the local details

The key facts for Castleford. We reach Castleford on our West Yorkshire survey days; Leeds is 9 miles away.

Postcodes
WF10, WF6
Area
West Yorkshire
Nearest towns
Kippax (3 miles), Pontefract (3 miles), Wakefield (6 miles), Leeds (9 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Kippax, Pontefract, Wakefield, Leeds, Ossett.

Planning and kerb rules for Castleford

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Castleford: common questions

Do you work in my part of Castleford?

We cover Castleford including WF10, WF6, and nearby Kippax, Pontefract, Wakefield.

Are there planning or highway rules in Castleford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Tarmac path cost in Castleford: what should I budget?

As a 2026 guide in Castleford, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Castleford?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Castleford

Tell us what you have in mind for Castleford and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Castleford: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price