Driveways and paths · West Midlands

Tarmac paths and footpaths in Walsall

A good tarmac path in Walsall looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

WALSALL GUIDE£55–£90 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Walsall

For Walsall, we apply the West Midlands rate, in line with our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£55–£90 per m²
Example: 10 m² path£660–£1,100
Example: 20 m² path£1,200–£2,000
Example: 40 m² path£2,200–£3,600

As a 2026 guide in Walsall, tarmac path work runs at about £55–£90 per m² including VAT, so a 40 m² path is roughly £2,200–£3,600. Guide only; the survey confirms a fixed price.

Where we work in and around Walsall

What applies in Walsall. We cover Walsall as part of our regular West Midlands rounds.

Postcodes
WS1, WS2, WS5
Area
West Midlands
Nearest towns
Bloxwich (2 miles), Wednesbury (3 miles), Aldridge (3 miles), Willenhall (3 miles)
Pricing
West Midlands, in line with our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Bloxwich, Wednesbury, Aldridge, Willenhall, Wednesfield.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Planning and kerb rules for Walsall

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Your questions answered

Tarmac path cost in Walsall: what should I budget?

As a 2026 guide in Walsall, tarmac path work runs at about £55–£90 per m² including VAT, so a 40 m² path is roughly £2,200–£3,600. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Walsall free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Walsall?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Walsall?

We cover Walsall including WS1, WS2, WS5, and nearby Bloxwich, Wednesbury, Aldridge.

Other work in Walsall

Tell us what you have in mind for Walsall and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Walsall: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price