Driveways and paths · South Yorkshire

Tarmac paths and footpaths in Thorne

A good tarmac path in Thorne looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

THORNE GUIDE£53–£86 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Thorne

For Thorne, we apply the Yorkshire and the Humber rate, about 4% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£86 per m²
Example: 10 m² path£630–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,100–£3,450

As a 2026 guide in Thorne, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Guide only; the survey confirms a fixed price.

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Thorne

The key facts for Thorne. Thorne is covered on our South Yorkshire rounds, 26 miles from Sheffield.

Postcodes
DN8, DN7
Area
South Yorkshire
Nearest towns
Goole (7 miles), Doncaster (9 miles), Bentley (9 miles), Adwick le Street (9 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Goole, Doncaster, Bentley, Adwick le Street, Conisbrough.

Rules that apply in Thorne

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

What we do on a tarmac path

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Thorne: common questions

What approvals apply in Thorne?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Thorne?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a tarmac path take in Thorne?

Often 1–2 days. We book Thorne surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Which Thorne postcodes do you cover?

We cover Thorne including DN8, DN7, and nearby Goole, Doncaster, Bentley.

Also in Thorne

Tell us what you have in mind for Thorne and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Thorne: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price