Tarmac paths and footpaths in Telford

Tarmac path prices in Telford

Guide prices below are for Telford, adjusted for the West Midlands, where surfacing rates run in line with our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£55–£90 per m²
Example: 10 m² path	£660–£1,100
Example: 20 m² path	£1,200–£2,000
Example: 40 m² path	£2,200–£3,600

As a 2026 guide in Telford, tarmac path work runs at about £55–£90 per m² including VAT, so a 20 m² path is roughly £1,200–£2,000. Guide only; the survey confirms a fixed price.

The build-up we price

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Path set out to the line and width you want
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Telford: the local details

Survey cover and pricing for Telford. We cover Telford as part of our regular Shropshire rounds.

Postcodes: TF3, TF4, TF2, TF7, TF8, TF12
Area: Shropshire
Nearest towns: Hadley (2 miles), Wellington (3 miles), Ryton (6 miles), Newport (Shropshire) (7 miles)
Pricing: West Midlands, in line with our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Hadley, Wellington, Ryton, Newport (Shropshire), Shrewsbury.

Do I need permission in Telford?

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Your questions answered

Do you work in my part of Telford?

We cover Telford including TF3, TF4, TF2, TF7, TF8, TF12, and nearby Hadley, Wellington, Ryton.

Tarmac path cost in Telford: what should I budget?

As a 2026 guide in Telford, tarmac path work runs at about £55–£90 per m² including VAT, so a 20 m² path is roughly £1,200–£2,000. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Telford free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Telford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Telford

Ready for a price in Telford? Use the guide price tool or send the form, and we'll arrange a visit.