Driveways and paths · Norfolk

Tarmac paths and footpaths in Thetford

Tarmac paths and footpaths in Thetford start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

THETFORD GUIDE£58–£94 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Thetford

These Thetford guide prices reflect rates in the East of England, about 5% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£58–£94 per m²
Example: 10 m² path£690–£1,150
Example: 20 m² path£1,250–£2,100
Example: 40 m² path£2,300–£3,800

As a 2026 guide in Thetford, tarmac path work runs at about £58–£94 per m² including VAT, so a 20 m² path is roughly £1,250–£2,100. Guide only; the survey confirms a fixed price.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Covering Thetford

What applies in Thetford. Thetford is covered on our Norfolk rounds, 27 miles from Norwich.

Postcodes
IP24
Area
Norfolk
Nearest towns
Bury St Edmunds (12 miles), East Dereham (20 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Bury St Edmunds, East Dereham.

How it is built

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Thetford

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Your questions answered

How long does a tarmac path take in Thetford?

Often 1–2 days. We book Thetford surveys alongside other jobs in Norfolk, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Thetford?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Tarmac path cost in Thetford: what should I budget?

As a 2026 guide in Thetford, tarmac path work runs at about £58–£94 per m² including VAT, so a 20 m² path is roughly £1,250–£2,100. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Thetford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Thetford

Ready for a price in Thetford? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Thetford: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price