Tarmac paths and footpaths in Porthcawl
Homeowners in Porthcawl ask us about tarmac paths for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

How much should I budget in Porthcawl?
For Porthcawl, we apply the Welsh rate, about 5% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac garden path or footpath, hand-laid | £52–£86 per m² |
| Example: 10 m² path | £630–£1,050 |
| Example: 20 m² path | £1,150–£1,900 |
| Example: 40 m² path | £2,100–£3,400 |
As a 2026 guide in Porthcawl, tarmac path work runs at about £52–£86 per m² including VAT, so a 10 m² path is roughly £630–£1,050. Guide only; the survey confirms a fixed price.
Do I need permission in Porthcawl?
Repairs, paths and edging work rarely need planning permission. In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first.
What the price covers
A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.
- Path set out to the line and width you want
- Excavation to about 150–180 mm with spoil removed
- MOT Type 1 base, about 100 mm, compacted
- Timber, kerb or block edging on both sides
- Binder and surface course laid hot by hand and rolled
Where we work in and around Porthcawl
What applies in Porthcawl. Porthcawl is covered on our Mid Glamorgan rounds, 17 miles from Rhondda.
- Postcodes
- CF36
- Area
- Mid Glamorgan
- Nearest towns
- Pyle (3 miles), Bridgend (6 miles), Maesteg (9 miles), Pencoed (9 miles)
- Pricing
- Wales, about 5% below our UK midpoint
- Kerb approvals
- The council
Nearby, we work in Pyle, Bridgend, Maesteg, Pencoed, Llantwit Major.
Questions about tarmac paths in Porthcawl
Do you cover all of Porthcawl?
We cover Porthcawl including CF36, and nearby Pyle, Bridgend, Maesteg.
What is the price of a tarmac path in Porthcawl?
As a 2026 guide in Porthcawl, tarmac path work runs at about £52–£86 per m² including VAT, so a 10 m² path is roughly £630–£1,050. Edging, drainage and a dropped kerb are priced separately where needed.
Is the survey in Porthcawl free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What approvals apply in Porthcawl?
In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.
More we do in Porthcawl
- Permeable tarmac driveways
- Front garden to tarmac driveway
- Red tarmac driveways
- New tarmac driveways
- Tar and chip driveways
- Private and access road surfacing
- Everything in Porthcawl
Questions about tarmac paths in Porthcawl? Call, WhatsApp or use the form, and we'll talk it through.
Tarmac paths and footpaths in Porthcawl: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED