Driveways and paths · Lincolnshire

Tarmac paths and footpaths in Grimsby

Homeowners in Grimsby ask us about tarmac paths for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

GRIMSBY GUIDE£54–£88 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Grimsby?

These Grimsby guide prices reflect rates in the East Midlands, about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£54–£88 per m²
Example: 10 m² path£650–£1,050
Example: 20 m² path£1,200–£1,950
Example: 40 m² path£2,150–£3,550

As a 2026 guide in Grimsby, tarmac path work runs at about £54–£88 per m² including VAT, so a 10 m² path is roughly £650–£1,050. Guide only; the survey confirms a fixed price.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Gentle cross-fall so water runs off to the border

Grimsby: the local details

The key facts for Grimsby. As one of the larger towns in Lincolnshire, Grimsby sees regular survey visits.

Postcodes
DN32, DN31, DN34, DN33, DN37, DN41
Area
Lincolnshire
Nearest towns
Cleethorpes (2 miles), Louth (14 miles), Scunthorpe (24 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Close to Grimsby: Cleethorpes, Louth, Scunthorpe.

Do I need permission in Grimsby?

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Grimsby: common questions

Do you cover all of Grimsby?

We cover Grimsby including DN32, DN31, DN34, DN33, DN37, DN41, and nearby Cleethorpes, Louth, Scunthorpe.

Can I get a free survey in Grimsby?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a tarmac path in Grimsby?

As a 2026 guide in Grimsby, tarmac path work runs at about £54–£88 per m² including VAT, so a 10 m² path is roughly £650–£1,050. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a tarmac path in Grimsby?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Grimsby

Ready for a price in Grimsby? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Grimsby: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price