Driveways and paths · Leicestershire

Tarmac paths and footpaths in Braunstone

For tarmac paths in Braunstone, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

BRAUNSTONE GUIDE£54–£88 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Braunstone?

For Braunstone, we apply the East Midlands rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£54–£88 per m²
Example: 10 m² path£650–£1,050
Example: 20 m² path£1,200–£1,950
Example: 40 m² path£2,150–£3,550

As a 2026 guide in Braunstone, tarmac path work runs at about £54–£88 per m² including VAT, so a 40 m² path is roughly £2,150–£3,550. Guide only; the survey confirms a fixed price.

Braunstone: the local details

The key facts for Braunstone. Braunstone is covered on our Leicestershire rounds, 2 miles from Leicester.

Postcodes
LE3, LE19, LE6
Area
Leicestershire
Nearest towns
Leicester (2 miles), Oadby (4 miles), Wigston (4 miles), Earl Shilton (6 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Close to Braunstone: Leicester, Oadby, Wigston, Earl Shilton, Mountsorrel.

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a tarmac path

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Planning and kerb rules for Braunstone

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Questions about tarmac paths in Braunstone

What is the price of a tarmac path in Braunstone?

As a 2026 guide in Braunstone, tarmac path work runs at about £54–£88 per m² including VAT, so a 40 m² path is roughly £2,150–£3,550. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a tarmac path in Braunstone?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How quickly can work start in Braunstone?

Often 1–2 days. We book Braunstone surveys alongside other jobs in Leicestershire, and give you dates once the specification is agreed.

Do you work in my part of Braunstone?

We cover Braunstone including LE3, LE19, LE6, and nearby Leicester, Oadby, Wigston.

Also in Braunstone

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Braunstone.

Free survey for new surfacing

Tarmac paths and footpaths in Braunstone: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price