Driveways and paths · Kent

Tarmac paths and footpaths in Swanscombe

If you are weighing up tarmac paths in Swanscombe, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

SWANSCOMBE GUIDE£61–£99 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Swanscombe

These Swanscombe guide prices reflect rates in the South East, about 10% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£61–£99 per m²
Example: 10 m² path£730–£1,200
Example: 20 m² path£1,350–£2,200
Example: 40 m² path£2,400–£3,950

As a 2026 guide in Swanscombe, tarmac path work runs at about £61–£99 per m² including VAT, so a 20 m² path is roughly £1,350–£2,200. Guide only; the survey confirms a fixed price.

Covering Swanscombe

The key facts for Swanscombe. Swanscombe is covered on our Kent rounds, 15 miles from Maidstone.

Postcodes
DA10, DA9, DA3
Area
Kent
Nearest towns
Grays (2 miles), Gravesend (3 miles), Dartford (4 miles), South Ockendon (4 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Grays, Gravesend, Dartford, South Ockendon, Swanley.

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Swanscombe

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

What is included in a tarmac path?

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Questions about tarmac paths in Swanscombe

How quickly can work start in Swanscombe?

Often 1–2 days. We book Swanscombe surveys alongside other jobs in Kent, and give you dates once the specification is agreed.

Which Swanscombe postcodes do you cover?

We cover Swanscombe including DA10, DA9, DA3, and nearby Grays, Gravesend, Dartford.

Is the survey in Swanscombe free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Swanscombe?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Swanscombe

Ready for a price in Swanscombe? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Swanscombe: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price