Tarmac paths and footpaths in Sevenoaks

What does a tarmac path cost in Sevenoaks?

For Sevenoaks, we apply the South East rate, about 10% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£61–£99 per m²
Example: 10 m² path	£730–£1,200
Example: 20 m² path	£1,350–£2,200
Example: 40 m² path	£2,400–£3,950

As a 2026 guide in Sevenoaks, tarmac path work runs at about £61–£99 per m² including VAT, so a 20 m² path is roughly £1,350–£2,200. Guide only; the survey confirms a fixed price.

Rules that apply in Sevenoaks

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Layer by layer

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Path set out to the line and width you want
Excavation to about 150–180 mm with spoil removed
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Covering Sevenoaks

Survey cover and pricing for Sevenoaks. Sevenoaks is covered on our Kent rounds, 14 miles from Maidstone.

Postcodes: TN13, TN14, TN15
Area: Kent
Nearest towns: Tonbridge (6 miles), Swanley (9 miles), Tunbridge Wells (10 miles), Caterham (12 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Tonbridge, Swanley, Tunbridge Wells, Caterham, Bexley.

Sevenoaks: common questions

How much does a tarmac path cost in Sevenoaks?

As a 2026 guide in Sevenoaks, tarmac path work runs at about £61–£99 per m² including VAT, so a 20 m² path is roughly £1,350–£2,200. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Sevenoaks?

We cover Sevenoaks including TN13, TN14, TN15, and nearby Tonbridge, Swanley, Tunbridge Wells.

Can I get a free survey in Sevenoaks?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Sevenoaks?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Sevenoaks

Tell us what you have in mind for Sevenoaks and we'll book a survey and put the specification in writing.