Tarmac paths and footpaths in Ramsgate

What does a tarmac path cost in Ramsgate?

Guide prices below are for Ramsgate, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£61–£99 per m²
Example: 10 m² path	£730–£1,200
Example: 20 m² path	£1,350–£2,200
Example: 40 m² path	£2,400–£3,950

As a 2026 guide in Ramsgate, tarmac path work runs at about £61–£99 per m² including VAT, so a 10 m² path is roughly £730–£1,200. Guide only; the survey confirms a fixed price.

Covering Ramsgate

The key facts for Ramsgate. We reach Ramsgate on our Kent survey days; Maidstone is 39 miles away.

Postcodes: CT11, CT12
Area: Kent
Nearest towns: Broadstairs (2 miles), Margate (3 miles), Deal (8 miles), Herne Bay (13 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

Close to Ramsgate: Broadstairs, Margate, Deal, Herne Bay, Canterbury.

Planning and kerb rules for Ramsgate

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

The build-up we price

What we do on a tarmac path

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Excavation to about 150–180 mm with spoil removed
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Questions about tarmac paths in Ramsgate

Tarmac path cost in Ramsgate: what should I budget?

As a 2026 guide in Ramsgate, tarmac path work runs at about £61–£99 per m² including VAT, so a 10 m² path is roughly £730–£1,200. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Ramsgate?

We cover Ramsgate including CT11, CT12, and nearby Broadstairs, Margate, Deal.

Is the survey in Ramsgate free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a tarmac path in Ramsgate?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Ramsgate

Ready for a price in Ramsgate? Use the guide price tool or send the form, and we'll arrange a visit.