Tarmac paths and footpaths in Potters Bar
For tarmac paths in Potters Bar, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

Tarmac path prices in Potters Bar
For Potters Bar, we apply the East of England rate, about 5% above our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac garden path or footpath, hand-laid | £58–£94 per m² |
| Example: 10 m² path | £690–£1,150 |
| Example: 20 m² path | £1,250–£2,100 |
| Example: 40 m² path | £2,300–£3,800 |
As a 2026 guide in Potters Bar, tarmac path work runs at about £58–£94 per m² including VAT, so a 20 m² path is roughly £1,250–£2,100. Guide only; the survey confirms a fixed price.
What the price covers
A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.
- Path set out to the line and width you want
- MOT Type 1 base, about 100 mm, compacted
- Timber, kerb or block edging on both sides
- Binder and surface course laid hot by hand and rolled
- Gentle cross-fall so water runs off to the border
Potters Bar: the local details
Survey cover and pricing for Potters Bar. Potters Bar is covered on our Hertfordshire rounds, 10 miles from Watford.
- Postcodes
- EN6
- Area
- Hertfordshire
- Nearest towns
- Barnet (3 miles), Enfield (5 miles), Borehamwood (5 miles), Hatfield (5 miles)
- Pricing
- East of England, about 5% above our UK midpoint
- Kerb approvals
- The highway authority
We also cover nearby Barnet, Enfield, Borehamwood, Hatfield, Cheshunt.
How it is built
Planning and kerb rules for Potters Bar
Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.
Potters Bar: common questions
How long will the work take at my Potters Bar property?
Often 1–2 days. We book Potters Bar surveys alongside other jobs in Hertfordshire, and give you dates once the specification is agreed.
Will someone visit before I get a fixed price in Potters Bar?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Which Potters Bar postcodes do you cover?
We cover Potters Bar including EN6, and nearby Barnet, Enfield, Borehamwood.
Are there planning or highway rules in Potters Bar?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
More we do in Potters Bar
- Car park and yard repairs
- Car park surfacing
- Tarmac driveway repairs
- Private and access road surfacing
- Tarmac driveway resurfacing
- Tar and chip driveways
- Everything in Potters Bar
Ready for a price in Potters Bar? Use the guide price tool or send the form, and we'll arrange a visit.
Tarmac paths and footpaths in Potters Bar: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED