Driveways and paths · Herefordshire

Tarmac paths and footpaths in Hereford

Every tarmac path we price in Hereford comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

HEREFORD GUIDE£55–£90 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Hereford

For Hereford, we apply the West Midlands rate, in line with our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£55–£90 per m²
Example: 10 m² path£660–£1,100
Example: 20 m² path£1,200–£2,000
Example: 40 m² path£2,200–£3,600

As a 2026 guide in Hereford, tarmac path work runs at about £55–£90 per m² including VAT, so a 10 m² path is roughly £660–£1,100. Guide only; the survey confirms a fixed price.

Hereford: the local details

The key facts for Hereford. We reach Hereford on our Herefordshire survey days; Hereford is under a mile away.

Postcodes
HR1, HR4, HR2
Area
Herefordshire
Nearest towns
Ross-on-Wye (12 miles), Leominster (12 miles), Ledbury (12 miles)
Pricing
West Midlands, in line with our UK midpoint
Kerb approvals
The highway authority

The same service is available in Ross-on-Wye, Leominster, Ledbury.

Do I need permission in Hereford?

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tarmac paths in Hereford

Do you cover all of Hereford?

We cover Hereford including HR1, HR4, HR2, and nearby Ross-on-Wye, Leominster, Ledbury.

Are there planning or highway rules in Hereford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Hereford property?

Often 1–2 days. We book Hereford surveys alongside other jobs in Herefordshire, and give you dates once the specification is agreed.

Is the survey in Hereford free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Hereford

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Hereford.

Free survey for new surfacing

Tarmac paths and footpaths in Hereford: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price