Driveways and paths · Greater Manchester

Tarmac paths and footpaths in Eccles

Planning a tarmac path in Eccles? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

ECCLES GUIDE£53–£87 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

How much should I budget in Eccles?

For Eccles, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£87 per m²
Example: 10 m² path£640–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,150–£3,500

As a 2026 guide in Eccles, tarmac path work runs at about £53–£87 per m² including VAT, so a 10 m² path is roughly £640–£1,050. Guide only; the survey confirms a fixed price.

Rules that apply in Eccles

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Eccles: the local details

Survey cover and pricing for Eccles. Eccles sits 4 miles from Manchester, within our regular Greater Manchester cover.

Postcodes
M30, M17
Area
Greater Manchester
Nearest towns
Swinton (1 mile), Salford (2 miles), Stretford (2 miles), Urmston (3 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Close to Eccles: Swinton, Salford, Stretford, Urmston, Walkden.

Questions about tarmac paths in Eccles

How quickly can work start in Eccles?

Often 1–2 days. We book Eccles surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

How much does a tarmac path cost in Eccles?

As a 2026 guide in Eccles, tarmac path work runs at about £53–£87 per m² including VAT, so a 10 m² path is roughly £640–£1,050. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Eccles?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Eccles postcodes do you cover?

We cover Eccles including M30, M17, and nearby Swinton, Salford, Stretford.

More we do in Eccles

Tell us what you have in mind for Eccles and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Eccles: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price