Driveways and paths · Greater London

Tarmac paths and footpaths in Feltham

Every tarmac path we price in Feltham comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

FELTHAM GUIDE£66–£108 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Feltham?

Guide prices below are for Feltham, adjusted for London, where surfacing rates run about 20% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£66–£108 per m²
Example: 10 m² path£790–£1,300
Example: 20 m² path£1,450–£2,400
Example: 40 m² path£2,650–£4,300

As a 2026 guide in Feltham, tarmac path work runs at about £66–£108 per m² including VAT, so a 10 m² path is roughly £790–£1,300. Guide only; the survey confirms a fixed price.

What is included in a tarmac path?

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Where we work in and around Feltham

Survey cover and pricing for Feltham. We cover Feltham as part of our regular Greater London rounds.

Postcodes
TW14, TW13, TW6
Area
Greater London
Nearest towns
Ashford (Surrey) (2 miles), Hounslow (3 miles), Sunbury-on-Thames (3 miles), Heston (3 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Ashford (Surrey), Hounslow, Sunbury-on-Thames, Heston, West Molesey.

Planning and kerb rules for Feltham

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

How it is built

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tarmac paths in Feltham

Can I get a free survey in Feltham?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a tarmac path in Feltham?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Feltham postcodes do you cover?

We cover Feltham including TW14, TW13, TW6, and nearby Ashford (Surrey), Hounslow, Sunbury-on-Thames.

How much does a tarmac path cost in Feltham?

As a 2026 guide in Feltham, tarmac path work runs at about £66–£108 per m² including VAT, so a 10 m² path is roughly £790–£1,300. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Feltham

Ready for a price in Feltham? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Feltham: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price