Driveways and paths · Greater London

Tarmac paths and footpaths in Acton

Every tarmac path we price in Acton comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

ACTON GUIDE£66–£108 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Acton?

Guide prices below are for Acton, adjusted for London, where surfacing rates run about 20% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£66–£108 per m²
Example: 10 m² path£790–£1,300
Example: 20 m² path£1,450–£2,400
Example: 40 m² path£2,650–£4,300

As a 2026 guide in Acton, tarmac path work runs at about £66–£108 per m² including VAT, so a 40 m² path is roughly £2,650–£4,300. Guide only; the survey confirms a fixed price.

What we do on a tarmac path

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Where we work in and around Acton

What applies in Acton. As one of the larger towns in Greater London, Acton sees regular survey visits.

Postcodes
W3, W5
Area
Greater London
Nearest towns
Chiswick (1 mile), Shepherds Bush (2 miles), Willesden (2 miles), Brent (3 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Chiswick, Shepherds Bush, Willesden, Brent, Greenford.

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Do I need permission in Acton?

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Your questions answered

What is the price of a tarmac path in Acton?

As a 2026 guide in Acton, tarmac path work runs at about £66–£108 per m² including VAT, so a 40 m² path is roughly £2,650–£4,300. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Acton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Acton?

We cover Acton including W3, W5, and nearby Chiswick, Shepherds Bush, Willesden.

Are there planning or highway rules in Acton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Acton

Tell us what you have in mind for Acton and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Acton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price