Driveways and paths · Forth Valley

Tarmac paths and footpaths in Alloa

Planning a tarmac path in Alloa? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

ALLOA GUIDE£54–£88 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Alloa

These Alloa guide prices reflect rates in Scotland, about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£54–£88 per m²
Example: 10 m² path£650–£1,050
Example: 20 m² path£1,200–£1,950
Example: 40 m² path£2,150–£3,550

As a 2026 guide in Alloa, tarmac path work runs at about £54–£88 per m² including VAT, so a 20 m² path is roughly £1,200–£1,950. Guide only; the survey confirms a fixed price.

Rules that apply in Alloa

Repairs, paths and edging work rarely need planning permission. In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Covering Alloa

The key facts for Alloa. Smaller towns such as Alloa are surveyed alongside nearby jobs in the Forth Valley.

Postcodes
FK10, FK12, FK13, FK11
Area
Forth Valley
Nearest towns
Stirling (6 miles), Stenhousemuir (6 miles), Larbert (7 miles), Grangemouth (8 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Stirling, Stenhousemuir, Larbert, Grangemouth, Falkirk.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Alloa: common questions

Tarmac path cost in Alloa: what should I budget?

As a 2026 guide in Alloa, tarmac path work runs at about £54–£88 per m² including VAT, so a 20 m² path is roughly £1,200–£1,950. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Alloa?

We cover Alloa including FK10, FK12, FK13, FK11, and nearby Stirling, Stenhousemuir, Larbert.

Can I get a free survey in Alloa?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long will the work take at my Alloa property?

Often 1–2 days. We book Alloa surveys alongside other jobs in the Forth Valley, and give you dates once the specification is agreed.

More we do in Alloa

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Alloa.

Free survey for new surfacing

Tarmac paths and footpaths in Alloa: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price