Tarmac paths and footpaths in Aberystwyth

How much should I budget in Aberystwyth?

For Aberystwyth, we apply the Welsh rate, about 5% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£52–£86 per m²
Example: 10 m² path	£630–£1,050
Example: 20 m² path	£1,150–£1,900
Example: 40 m² path	£2,100–£3,400

As a 2026 guide in Aberystwyth, tarmac path work runs at about £52–£86 per m² including VAT, so a 10 m² path is roughly £630–£1,050. Guide only; the survey confirms a fixed price.

Do I need permission in Aberystwyth?

Repairs, paths and edging work rarely need planning permission. In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold.

Layer by layer

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Excavation to about 150–180 mm with spoil removed
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Where we work in and around Aberystwyth

Survey cover and pricing for Aberystwyth. Aberystwyth is covered on our Dyfed rounds, 51 miles from Llanelli.

Postcodes: SY23, SY24
Area: Dyfed
Nearest towns: none within easy reach
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

Questions about tarmac paths in Aberystwyth

Tarmac path cost in Aberystwyth: what should I budget?

As a 2026 guide in Aberystwyth, tarmac path work runs at about £52–£86 per m² including VAT, so a 10 m² path is roughly £630–£1,050. Edging, drainage and a dropped kerb are priced separately where needed.

Which Aberystwyth postcodes do you cover?

We cover Aberystwyth including SY23, SY24.

Is the survey in Aberystwyth free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a tarmac path in Aberystwyth?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Also in Aberystwyth

Tell us what you have in mind for Aberystwyth and we'll book a survey and put the specification in writing.