Driveways and paths · County Londonderry

Tarmac paths and footpaths in Coleraine

Tarmac paths and footpaths in Coleraine start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

COLERAINE GUIDE£48–£79 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Coleraine?

Guide prices below are for Coleraine, adjusted for Northern Ireland, where surfacing rates run about 12% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£48–£79 per m²
Example: 10 m² path£580–£950
Example: 20 m² path£1,050–£1,750
Example: 40 m² path£1,950–£3,150

As a 2026 guide in Coleraine, tarmac path work runs at about £48–£79 per m² including VAT, so a 40 m² path is roughly £1,950–£3,150. Guide only; the survey confirms a fixed price.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled

Where we work in and around Coleraine

The key facts for Coleraine. Coleraine is covered on our County Londonderry rounds, 27 miles from Derry.

Postcodes
BT52, BT51
Area
County Londonderry
Nearest towns
Portstewart (4 miles), Portrush (4 miles), Ballymoney (8 miles), Limavady (13 miles)
Pricing
Northern Ireland, about 12% below our UK midpoint
Kerb approvals
DfI Roads

Close to Coleraine: Portstewart, Portrush, Ballymoney, Limavady.

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Coleraine

Repairs, paths and edging work rarely need planning permission. In Northern Ireland, the Planning (General Permitted Development) Order (Northern Ireland) 2015 allows a hard surface between the front of a house and a road without permission if it is porous or drains to a porous area within the property, once it exceeds 5 m². Listed buildings and some access changes need permission. Any new or altered vehicle access onto a public road needs approval from DfI Roads, not the council.

Coleraine: common questions

Do you cover all of Coleraine?

We cover Coleraine including BT52, BT51, and nearby Portstewart, Portrush, Ballymoney.

Are there planning or highway rules in Coleraine?

In Northern Ireland, more than 5 m² of hard surface in front of a house should be porous or drain to a porous area within the property; DfI Roads approves dropped kerbs. Dropped kerbs are approved by DfI Roads.

Can I get a free survey in Coleraine?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a tarmac path cost in Coleraine?

As a 2026 guide in Coleraine, tarmac path work runs at about £48–£79 per m² including VAT, so a 40 m² path is roughly £1,950–£3,150. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Coleraine

Ready for a price in Coleraine? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Coleraine: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price