Driveways and paths · Buckinghamshire

Tarmac paths and footpaths in Newport Pagnell

A good tarmac path in Newport Pagnell looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

NEWPORT PAGNELL GUIDE£61–£99 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Newport Pagnell?

Guide prices below are for Newport Pagnell, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£61–£99 per m²
Example: 10 m² path£730–£1,200
Example: 20 m² path£1,350–£2,200
Example: 40 m² path£2,400–£3,950

As a 2026 guide in Newport Pagnell, tarmac path work runs at about £61–£99 per m² including VAT, so a 10 m² path is roughly £730–£1,200. Guide only; the survey confirms a fixed price.

Newport Pagnell: the local details

What applies in Newport Pagnell. Newport Pagnell is covered on our Buckinghamshire rounds, 3 miles from Milton Keynes.

Postcodes
MK16, MK46
Area
Buckinghamshire
Nearest towns
Milton Keynes (3 miles), Bletchley (7 miles), Kempston (10 miles), Ampthill (10 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Milton Keynes, Bletchley, Kempston, Ampthill, Bedford.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Rules that apply in Newport Pagnell

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Your questions answered

What is the price of a tarmac path in Newport Pagnell?

As a 2026 guide in Newport Pagnell, tarmac path work runs at about £61–£99 per m² including VAT, so a 10 m² path is roughly £730–£1,200. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Newport Pagnell?

We cover Newport Pagnell including MK16, MK46, and nearby Milton Keynes, Bletchley, Kempston.

Are there planning or highway rules in Newport Pagnell?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Newport Pagnell?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Newport Pagnell

Tell us what you have in mind for Newport Pagnell and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Newport Pagnell: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price