Driveways and paths · Worcestershire

Tarmac driveway resurfacing in Worcester

A good tarmac resurfacing job in Worcester looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

WORCESTER GUIDE£25–£45 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

How much should I budget in Worcester?

For Worcester, we apply the West Midlands rate, in line with our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£25–£45 per m²
Example: 30 m² drive£830–£1,500
Example: 50 m² drive£1,250–£2,250
Example: 80 m² drive£2,000–£3,600

As a 2026 guide in Worcester, tarmac resurfacing work runs at about £25–£45 per m² including VAT, so a 50 m² drive is roughly £1,250–£2,250. Guide only; the survey confirms a fixed price.

Worcester: the local details

Survey cover and pricing for Worcester. As one of the larger towns in Worcestershire, Worcester sees regular survey visits.

Postcodes
WR1, WR2, WR5, WR4, WR3
Area
Worcestershire
Nearest towns
Droitwich (6 miles), Malvern (7 miles), Stourport-on-Severn (11 miles), Bromsgrove (12 miles)
Pricing
West Midlands, in line with our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Droitwich, Malvern, Stourport-on-Severn, Bromsgrove, Evesham.

Rules that apply in Worcester

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

How it is built

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in tarmac resurfacing?

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Cut out and patch failed areas before overlaying
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled

Your questions answered

Is the survey in Worcester free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Worcester?

We cover Worcester including WR1, WR2, WR5, WR4, WR3, and nearby Droitwich, Malvern, Stourport-on-Severn.

Do I need permission for tarmac resurfacing in Worcester?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does tarmac resurfacing cost in Worcester?

As a 2026 guide in Worcester, tarmac resurfacing work runs at about £25–£45 per m² including VAT, so a 50 m² drive is roughly £1,250–£2,250. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Worcester

Tell us what you have in mind for Worcester and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac driveway resurfacing in Worcester: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price